C Type Power Press

Frame :

The Frame is of all Steel Construction, Fabricated from Steel Plates with Suitable Cross ribbings. Presses upto 30T will be supplied with C.I. Legs. Proper alignment of the frame is ensured by machining of the cut steel plates before welding.

Clutch :

The clutch is of pin/rolling key type. The clutch is rigid and well supported. The clutch gives continues stroke for mass production.

Crank Shaet :

Crank Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for perfect alignment.

Flywheel :

Properly sized flywheel, is made of high grade cast iron & is balanced for storing and releasing adequate energy for the pressing operations.

Gears :

Gears are of steel cast. Gear teeth are generated by hobbing.

Table & Ram :

Table and ram are made of heavy duty cast iron & seasoned. They are perfectly aligned to each other quality pressings.

Lubrication :

An efficient shot lubrication system has been provided for lubrication the sliding surface and moving parts. The lubrication is achieved through hand pump.

Description	5 Ton	10 Ton	20 Ton	30 Ton	50 Ton	80 Ton	100 Ton	150 Ton	200Ton	250 Ton
Crankshaft Diameter	50	57	70	83	102	114	127	150	175	200
Adjustment of Stroke	Jun-50	Jun-60	Nov-75	13-83	13-100	25-114	32-127	32-127	50.175	50-200
Adjustment in Ram	25	25	32	32	40	40	50	50	60	60
Punch Hole in Ram	25	25-Apr	31-75	38-1	50-8	50-8	57	57	63-5	63-5
Hole in Bed	65	75	89	102	114	150	180	200	225	225
Length & Width of Bed	200x350	250x400	305x508	355x610	450030	558X812	610x863	660x914	711x990	762x1066
Thickness of Bed	50	50	63	75	75	90	115	127	140	150
Distance Between Bed to Ram	180	228	300	355	400	450	507	558	610	711
Stroke per Minute	70	60	50	45	35	35	35	30	30	25
H.P Required	0.5	1	2	3	5	7.5	10	15	20	25
Weight Approx	350	550	1100	1400	2450	3850	4800	6000	8500	11500

Standard Accessories:
Motor Pully
Motor Stand
Fly Wheel Guard
Gear Guard
Stud Driver

Optional Accessories:
Electric Motor
Motor Starter
V-Belts
Oil Pump
Die Clamps Etc

CAPACITY	10 TONS	20 TONS	30 TONS	50 TONS	80 TONS	100 TONS	150 TONS	200 TONS	250TONS
CRANK SHAFT DIA	57	75	82	100	115	125	150	175	200
BED SIZE- LR X FB	450x250	500x375	550x375	750x500	800x550	900x650	900x650	900x700	900x700
STROKE ADJUSTABLE	Jun-50	Jun-75	Jun-75	6-100	12-115	12-125	12-150	12-150	12-150
DEPTH OF THROAT	125	23-Jun	190	250	280	325	325	350	350
HOLE IN RAM	25	32	32	38	50	50	50	50	50
SHUT HEIGHT	200	200	225	250	288	325	300	350	350
SLIDE ADJUSTMENT	25	40	40	50	50	65	65	65	65
DIST BED TO RAM	250	275	300	350	400	450	450	500	500
HOLE IN BED	70	90	90	100	115	125	150	150	150
WHELL DIA	455	550	625	750	900	1000	1125	1175	1200
STROKES PER MINUTE	60	35	35	35	35	35	35	30	30
POWER REQUIRED	1/1440	2/1440	3/1440	5/1440	7.5/1440	10/1440	15/1440	20/1440	25/1440
APPROX WEIGHT	630	1200	1450	2600	3800	5500	7500	8500	9500

Power Supplu : 400/440 Volts, 3 Phase, 50 Cycles.
All Dimensions Are In mm
As Day to Day Improvements Are Contemplated We Reserve The Ring To Change Specification/Design Without Prior Notice
Advice will be Solicited For Your Drawing.

Products